- Measures for improving the welding seam of plastic mold production2017-07-18
In the injection molding plant in the injection of new technology often have a lot, and in the injection molding processing of the reasons for the weld, plastic products, the weld is the…
- How to choose raw materials for injection molding2017-07-18
A good set of plastic mold must also be inseparable from the good raw materials, mold in the Thai mold design for so many years, has always insisted on the use of advanced mold raw mater…
- Cause Analysis of Dent in Plastic Injection Molding2017-07-18
As the molding is cooled and contracted, the molding is in close contact with the cooling surface of the mold cavity, and the cooling efficiency is lowered. After the molding is continue…
- How to avoid the phenomenon of plastic mold company2017-07-18
1. Phenomenon:Plastic mold company pointed out that the molten resin into the mold part of the split surface and the type of joint surface forming a gap after the occurrence of flash.Pos…
- Talking about the Characteristics of Plastic Injection Molding2017-07-18
This article describes the characteristics of plastic mold products, in our daily life, we can see everywhere plastic products, such as food packaging shell, plastic bags, plastic cups,…
- How to judge the quality of injection molding2017-07-17
Nowadays, the application of plastic is more and more, and engaged in injection processing business is a lot. However, the technical strength of various enterprises, equipment levels are…
- What should the plastic mold assembly diagram include?2017-07-17
1. Mold forming part of the structure2. The structure of the pouring system and the exhaust system.3. Parting and sub-mode pickup mode.4. Outline structure and all connections, positioni…
Sweep, more exciting!
